|
|
| Line 126: |
Line 126: |
| A Raspberry Pi 4, 15W USB-C Power Supply is recommended. (Output voltage: 5.1V, Output current: 3.0A, Output power: 15W) | | A Raspberry Pi 4, 15W USB-C Power Supply is recommended. (Output voltage: 5.1V, Output current: 3.0A, Output power: 15W) |
|
| |
|
| === Rear Panel Connections Expanded via Analog Bridge and Crosspoint === | | === Video Port Description === |
| [[File:Morph_4K_Analog_Connector_Cards.png|thumb|right|400px|Example of Connector Cards from top to bottom: SCART & Component, VGA & Component, and VGA & VGA]] | | [[File:Morph_4K_Analog_Connector_Cards.png|thumb|right|400px|Example of Connector Cards from top to bottom: SCART & Component, VGA & Component, and VGA & VGA]] |
|
| |
|
| Morph 4K can be expanded with a pcb module that adapts a row of analog connectors. There are two modules, an Analog Bridge and an Analog Crosspoint (to be released). The differences between these two modules is in the manner in which they handle analog ports. The Analog Bridge covers two analog input ports whereas the Analog Crosspoint covers one analog input port and one analog output port. The analog ports come as Connector Cards and are offered in three flavors for each module: SCART & Component, VGA & Component, and VGA & VGA.
| |
|
| |
| '''Note:''' ''Custom made Connector Cards can be generated using a [https://github.com/citrus3000psi/BLANK_CARD blank card template created by citrus3000psi].''
| |
|
| |
|
| ==== SCART & Component ==== | | ==== SCART & Component ==== |
| Line 151: |
Line 148: |
|
| |
|
| '''*''' ''S-Video only works over the SCART port when luma (Y) is set to green (pin 11) and chroma (C) is set to red (pin 15). This does not follow SCART specification i.e. chroma (C) set to red (Pin 15) and luma (Y) set to sync/composite video (pin 20).'' | | '''*''' ''S-Video only works over the SCART port when luma (Y) is set to green (pin 11) and chroma (C) is set to red (pin 15). This does not follow SCART specification i.e. chroma (C) set to red (Pin 15) and luma (Y) set to sync/composite video (pin 20).'' |
|
| |
| ==== VGA & Component ====
| |
|
| |
| Port A contains VGA w/ 3.5mm audio that includes:
| |
|
| |
| * Formats RGBHV, RGBs, RGsB, YPbPr, Composite Video, S-Video
| |
| * Green/HSYNC Pin support CVBS
| |
| * Green/Red Pins support S-Video
| |
| * Sync types accepted: TTL Csync, Attenuated Csync, Composite Video Sync, Luma, TTL
| |
| * Audio inputs over pins 12 and 15 via jumper (1.27mm)
| |
| * 3.5mm audio port accepts analog audio (Auxillary-to-RCA)
| |
|
| |
| Port B contains Component w/ 3.5mm audio that includes:
| |
|
| |
| * Formats RGBS, RGsB, RGB, YPbPr, Composite Video, S-Video
| |
| * Green supports CVBS (shared with S-Video Port)
| |
| * Green/Red support S-Video (shared with S-Video Port)
| |
| * 3.5mm audio port accepts S/PDIF (Mini-TOSLINK) or analog audio (Auxillary-to-RCA)
| |
|
| |
| ==== VGA & VGA ====
| |
|
| |
| Port A contains VGA w/ 3.5mm audio that includes:
| |
|
| |
| * Formats RGBHV, RGBs, RGsB, YPbPr, Composite Video, S-Video
| |
| * Green/HSYNC Pin support CVBS
| |
| * Green/Red Pins support S-Video
| |
| * Sync types accepted: TTL Csync, Attenuated Csync, Composite Video Sync, Luma, TTL
| |
| * Audio inputs accepted over pins 12 and 15 via jumper (1.27mm)
| |
| * 3.5mm audio port accepts analog audio (Auxillary-to-RCA)
| |
|
| |
| Port B contains VGA w/ 3.5mm audio that includes:
| |
|
| |
| * Formats RGBHV, RGBs, RGsB, YPbPr, Composite Video, S-Video
| |
| * Green pin support CVBS (shared with S-Video and CVBS port)
| |
| * Green/Red Pins support S-Video (shared with S-Video and CVBS)
| |
| * HSYNC pin supports CVBS
| |
| * Sync types accepted: TTL Csync, Attenuated Csync, Composite Video Sync, Luma, TTL
| |
| * Audio inputs accepted over pins 12 and 15 via jumper (1.27mm)
| |
| * 3.5mm audio port accepts S/PDIF (Mini-TOSLINK) or analog audio (Auxillary-to-RCA)
| |
|
| |
|
| '''Note:''' ''To use the dedicated composite video input on the dual VGA bridge, you need to choose "Input Port B -> Composite Video over GREEN".'' | | '''Note:''' ''To use the dedicated composite video input on the dual VGA bridge, you need to choose "Input Port B -> Composite Video over GREEN".'' |