Retro GEM Wii Installation: Difference between revisions
| Line 45: | Line 45: | ||
=== Items Required === | === Items Required === | ||
* Temperature Controlled Soldering Iron | |||
* Leaded or Lead Free Solder | |||
* Non-Corrosive, No Clean Flux (Amtech 559 / Kester 959T) | |||
* 99% Isopropyl Alcohol | |||
* Multi Meter | |||
* Exacto Knife | |||
* Small screw Phillips screw drivers | |||
* Side cutters | |||
== Step 1 - GEM Jumpers == | == Step 1 - GEM Jumpers == | ||
Revision as of 14:52, 16 December 2025
Retro GEM Logo
Introduction
Disclaimer
This kit is for advanced installers only. Install at your own risk. We cannot be held responsible for damage to your console and/or kit.
Important Information
The kit is compatible with all Wii Models. There are three different installation types depending on your Wii Motherboard. These will be referred to as 6 Layer, 4 Layer, Wii Mini.
6 Layer Models:
- RVL-CPU-01
- RVL-CPU-10
- RVL-CPU-20
- RVL-CPU-30
4 Layer Models:
- RVL-CPU-40
- RVL-CPU-50
- RVL-CPU-60
Wii Mii:
- RVK-CPU-01
- RVK-CPU-02
Here is a video installation of a 4 layer board. Please use it for references and techniques.
Kit Contents
- Wii Main Flex
- USB Sniffer Board
- USB Sniffer Flex
- Mini HDMI Adapter Board
- Male HDMI Adapter
- 150mm 18p FFC Cable
- FR4 Mount
- M1.6 Screw mount (2x)
- M1.6 Screw 3mm (2x)
- Wifi Antenna
- .5mm Thermal Pad
Items Required
- Temperature Controlled Soldering Iron
- Leaded or Lead Free Solder
- Non-Corrosive, No Clean Flux (Amtech 559 / Kester 959T)
- 99% Isopropyl Alcohol
- Multi Meter
- Exacto Knife
- Small screw Phillips screw drivers
- Side cutters